--- vlan/vconfig.c.orig 2004-03-27 10:52:29.000000000 +0100 +++ vlan/vconfig.c 2004-03-27 10:53:35.000000000 +0100 @@ -37,31 +37,30 @@ static char* usage = - " -Usage: add [interface-name] [vlan_id] - rem [vlan-name] - set_flag [interface-name] [flag-num] [0 | 1] - set_egress_map [vlan-name] [skb_priority] [vlan_qos] - set_ingress_map [vlan-name] [skb_priority] [vlan_qos] - set_name_type [name-type] - -* The [interface-name] is the name of the ethernet card that hosts - the VLAN you are talking about. -* The vlan_id is the identifier (0-4095) of the VLAN you are operating on. -* skb_priority is the priority in the socket buffer (sk_buff). -* vlan_qos is the 3 bit priority in the VLAN header -* name-type: VLAN_PLUS_VID (vlan0005), VLAN_PLUS_VID_NO_PAD (vlan5), - DEV_PLUS_VID (eth0.0005), DEV_PLUS_VID_NO_PAD (eth0.5) -* bind-type: PER_DEVICE # Allows vlan 5 on eth0 and eth1 to be unique. - PER_KERNEL # Forces vlan 5 to be unique across all devices. -* FLAGS: 1 REORDER_HDR When this is set, the VLAN device will move the - ethernet header around to make it look exactly like a real - ethernet device. This may help programs such as DHCPd which - read the raw ethernet packet and make assumptions about the - location of bytes. If you don't need it, don't turn it on, because - there will be at least a small performance degradation. Default - is OFF. -"; +"\n" +"Usage: add [interface-name] [vlan_id]\n" +" rem [vlan-name]\n" +" set_flag [interface-name] [flag-num] [0 | 1]\n" +" set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" +" set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" +" set_name_type [name-type]\n" +"\n" +"* The [interface-name] is the name of the ethernet card that hosts\n" +" the VLAN you are talking about.\n" +"* The vlan_id is the identifier (0-4095) of the VLAN you are operating on.\n" +"* skb_priority is the priority in the socket buffer (sk_buff).\n" +"* vlan_qos is the 3 bit priority in the VLAN header\n" +"* name-type: VLAN_PLUS_VID (vlan0005), VLAN_PLUS_VID_NO_PAD (vlan5),\n" +" DEV_PLUS_VID (eth0.0005), DEV_PLUS_VID_NO_PAD (eth0.5)\n" +"* bind-type: PER_DEVICE # Allows vlan 5 on eth0 and eth1 to be unique.\n" +" PER_KERNEL # Forces vlan 5 to be unique across all devices.\n" +"* FLAGS: 1 REORDER_HDR When this is set, the VLAN device will move the\n" +" ethernet header around to make it look exactly like a real\n" +" ethernet device. This may help programs such as DHCPd which\n" +" read the raw ethernet packet and make assumptions about the\n" +" location of bytes. If you don't need it, don't turn it on, because\n" +" there will be at least a small performance degradation. Default\n" +" is OFF.\n"; void show_usage() { fprintf(stdout,usage);